Tascam Pocketstudio 5, Руководство по началу работы

Страница: 20 / 28

5 – Your first song using the Pocketstudio 5
20
TASCAM Pocketstudio 5 Getting Started
6 Rewind to the start and record your vocals.
It’s unlikely that you’ll get them completely
right first time, so you will probably want to
use the Pocketstudio 5’s auto punch facility to make them perfect! See “Punch record-
ing” on page 14 for details of how to correct
your mistakes.
Adding the lead guitar
When you’ve done recorded the vocals, you can add
the lead guitar line.
We only have one track left, track 4, so we’ll have to
use that for the guitar line.
To start with, turn down the input volume for the
microphone, and turn off the routing for the
B input
to track 3 (press the
INPUT B
key and press the
REC
READY key for track 3 ).
1 Assign the guitar input (
A
) to track 4 (press
and hold down INPUT A and make sure that
REC READY 4
is the only
REC READY
key
that is flashing rapidly.
2 Adjust the input volume and the volume of
your guitar. Add an effect for the lead sound
(see “Adding a guitar effect” on page 17) for
how to do this.
3 Add EQ as necessary (see “Adding EQ” on
page 18).
4 Press the
PLAY
key to start playing back the
song from the start, and use the track faders
to adjust the relative levels of the two previ-
ous recordings (the rhythm guitar on tracks
1 and 2, and the vocals on track 3).
5
Play the guitar lead line along with the tracks
you recorded earlier.
TIP
Most people find it useful to use the mark features
(“Marks” on page 14) as well as the automated punch
facilities (“Punch recording” on page 14) when record-
ing overdubs like guitar solos.
Also, if you want to add extra parts, you may want to
do some track bouncing. See “Track bouncing” on
page 14 and “Track bouncing” on page 26 of the Refer-
ence Manual for some details regarding this.
Mixdown
The final stage in recording a song is the mixdown.
1
Disconnect the guitar and microphone and
set the input volume controls to the mini-
mum.
2 By default, the stereo picture is: tracks 1 and
3 are panned hard left, and tracks 2 and 4
are panned hard right. It’s usual to have a
more central vocal and lead instrument, but
the rhythm guitar (tracks 1 and 2) can prob-
ably be left unchanged.
From the main menu, select the
PAN
menu:
3 Move the cursor to the bottom line and select
track 3. Use the wheel to move this track (the
vocals) to the center (you can go through
L63
—full left, through
C
(center) to
R63
—
hard right. Play back the recording as you do
it, so that you get the right position.
Do the same for track 4 (and tracks 1 and 2,
if you like) so that all your recorded tracks
sound right with each other and with the
tone generator tracks.
TIP
You can also adjust the pan position of the parts of the
tone generator backing. See the section on Patterns for
full details.
4 If you want to add more EQ to the recorded
tracks, this is a good time to do it. You can
also add EQ to the left and right outputs of
the tone generator independently. From the
PAN
menu, move the cursor to the top of the
screen, and press
Ó
.
Select
TR1
through
TR4
for the four
tracks, or
TG_L
and
TG_R
for the two tone
generator outputs. Follow the directions in
“Adding EQ” on page 18 for details of how to
make the EQ settings.
F u n c / P A N , .
T r 1 T r 2 T r 3 T r 4
C C C C