Tascam PA-R200, Инструкция по эксплуатации

Страница: 69 / 100

Advanced Operations
En-69
See “Multi Zone” (
➔
page 64 ).
■
Operating on the AV receiver
Tip
• The Whole House Mode function shares the input source of main
room with Multi Zone (
➔
page 45 ).
■
Operating on the remote controller
To control Zone 2/3, you must press ZONE2 or ZONE3
on the remote controller first.
Adjusting the Volume for Zone 2/3
■
Operating on the remote controller
■
Operating on the AV receiver
If your Zone 2/3 speakers are connected to a receiver or
integrated amplifier in Zone 2/3, use its volume control to
adjust the volume.
Muting Zone 2/3
■
Operating on the remote controller
Tip
• To unmute, press ZONE2 or ZONE3 followed by MUTING
again. Zone can also be unmuted by adjusting the volume.
Setting the Zone 2/3 Out
Controlling Multi Zone Components
1
To turn on Zone 2/3 and select an input source,
press
ZONE 2
or
ZONE 3
followed by an input
selector button within 8 seconds.
Zone 2/3 turns on, the Z2 or Z3 indicator lights on the
AV receiver’s display.
Tip
• The corresponding trigger output goes high (+12 V).
To select the same source as the main room’s, press
ZONE 2 or ZONE 3 twice. “ Z2 Sel: Source ” or “ Z3
Sel: Source ” appears on the AV receiver’s display.
2
To turn off Zone 2/3, press ZONE 2 or ZONE 3
followed by STANDBY/ON within 8 seconds.
The zone is turned off.
Tip
• The corresponding trigger output goes low (0 volts).
ZONE 2 ZONE 3 MASTER VOLUME
STANDBY/ON
Input selector buttons
1
Press ZONE2 or ZONE3 , then point the remote
controller at the AV receiver and press
8 RECEIVER .
Zone 2/3 turns on, the Z2 or Z3 indicator lights on the
AV receiver’s display.
Tip
• The corresponding trigger output goes high (+12 V).
2
To select an input source for Zone 2/3, press
ZONE2 or ZONE3 , followed by an INPUT
SELECTOR button.
3 To turn off Zone 2/3, press ZONE2 or ZONE3 ,
followed by
8 RECEIVER
.
The zone is turned off.
Tip
• The corresponding trigger output goes low (0 volts).
8 RECEIVER
ZONE2
ZONE3
INPUT
SELECTOR
VOL q / w
MUTING
1 Press ZONE2 or ZONE3 .
2
Use VOL q / w .
1
Press
ZONE 2
or
ZONE 3
(the Z2 or Z3 indicator
on the AV receiver’s display flashes).
2 Use MASTER VOLUME control within 8 seconds.
1 Press ZONE2 or ZONE3 followed by MUTING .