The MiNiSTUDIO C reator, which also supports audio creation, uses
input circuits of even higher quality. Mic sound quality is dependent on the mic preamplifier. The
HDDA (High Definition Discrete Architecture) mic preamps use discrete construction that requires a
higher number of components. This distances them from other preamps. We selected all the parts
through listening evaluations to tune the sound quality.
Equalizer and compressor preset for talk programs
The built-in equalizer and compressor, which are functions to adjust the sound, are set for use with
a talk show when the unit is shipped new from the factory, so you will be able to achieve clear
sound without changing any settings. You can change the sound to a type you like simply by
selecting a preset using the dedicated software.
Two input jacks (MiNiSTUDIO Creator only )
The MiNiSTUDIO C reator has two mic input jacks that can be used for various applications
including performances with vocals and instrument or guest interviews. Both support the direct
input of condenser and dynamic mics as well as guitars.
EXPERT page allows adv anced settings and sound adjustment
Switch between the EASY tab for basic settings and the EXPERT tab for advanced settings in the
dedicated software. On the EXPERT page, in addition to making fine adjustments to equalizer,
compressor and other effect settings, you can also change the signal routing.
4-band equalizer and serious compressor
The full-featured 4-band equalizer has High and Low shelf bands, and High Mid and Low Mid bands
with peaks. The Low band can be changed to a low-cut filter (LC F), which is convenient for cutting
low frequencies entering a microphone.
Adjustable v oice effect parameters
You can adjust the parameters of the voice effects for the mic inputs or switch the effect off
independently. For example, to use it only on MIC 1, turn the effect off for MIC 2.
Detailed settings can be made for the PON trigger pads
You can configure the trigger pads according to your needs. Settings made on the EXPERT page
are retained even after switching to the EASY page.
FADE IN: Sets the fade-in time when played.
FADE OUT: Sets the fade-out time when played.
LEVEL: Sets the playback volume.
