2
To dub a selected track on the CD
1 Select the desired track by using the skip keys
or numeric keys, and start playback by
pressing the PLAY key or enter the playback
standby by pressing the READY key.
NOTE
The selected CD track number is shown on the
top left of the display while the display master is
set to CD.
2 Press the DUBBING key on either the front
panel or the remote control.
When the track is finished dubbing, both decks
will stop.
Recording an external source
The MD-CD1 can not only dub from CD to MD, it
also allows MD recording from external sound
sources.
Preparations
• Connect an external sound source to the
appropriate connector(s) (ANALOG INPUT or
DIGITAL (OPTICAL) INPUT on the rear panel
of the unit).
• Insert a recordable MiniDisc to the deck.
• Make sure that the deck is in stop mode.
Input source selection
Use the INPUT SEL key on the front panel or the
remote control to select the input source between
ANALOG and OPTICAL.
Track number
The current selection is shown on the right of the
display.
Input monitoring
Press the RECORD key on either the front panel or
the remote control.
The MD deck will enter recording standby mode, the
READY and RECORD indicators will light up.
The MD input signal can be monitored through
headphones or a connected audio system.
Monitoring
By connecting your monitor system
(amplifier/speakers) to the COMMON OUTPUT
connectors, you can monitor either of the CD and
MD decks.
NOTE
If you wish to monitor the CD and MD decks
independently, use the CD OUTPUT and MD
OUTPUT connectors.
Input source
INPUT SEL Key
