4
TASCAM HS-P82
HS-P82
Release Notes
V1.02 fixes
That default value of the reference level has been
•
changed from “–16dB” to “–20dB”.
The precision of the
•
POWER
OFF
GEN
function has been
improved.
The precision of time code capture at the start of
•
recording has been improved.
The precision of time code output when
•
TC
GEN
MODE
is set to
REC
RUN
has been improved.
If the display is dimmed completely, touch input is
•
disabled.
When the
•
SLATE key was pressed and released at the
same time as another key, the SLATE indicator would
stay lit. This issue has been corrected.
On the
•
MARK
LIST
screen, touching an empty line
when less than four marks were shown would cause
the Home Screen to reopen. This issue has been
corrected.
When set to
•
MONO
file mode, after pressing the
INFO
button on the folder selection screen, the
TOTAL
TIME
shown in the pop-up window was inaccurate. This issue
has been corrected.
When moving quickly between project, folder and take
•
selection screens, the display could become garbled.
This issue has been corrected.
When a channel link was on and the phantom power
•
setting was changed for those channels, the setting
change was not made for the even-numbered channel.
This issue has been corrected.
When a channel link was on, the remaining time
•
for
CF1
and
CF2
shown on the Home Screen was
inaccurate. This issue has been corrected.
When a channel set to a digital input was unlocked and
•
the input setting was changed to analog by turning on
a channel link, the input sound was not unmuted. This
issue has been corrected.
When a CF card was inserted immediately after starting
•
the unit, or if a CF card was inserted in a slot when the
other slot already had a CF card loaded, the
Media
Reading
pop-up window would remain displayed on
rare occasions. This issue has been corrected.
If a project recorded on a CF card was erased on a
•
computer, and then rebuilding another project was
conducted on this unit, the rebuilding would not
complete. This issue has been corrected.
If the name of a created folder had 31 characters, the
•
track name for Ch1 shown beneath the level meters
would be blank. This issue has been corrected.
When backing up settings to a CF card in
•
COMPACT
FLASH SLOT 2, the file would not be created in some
cases. This issue has been corrected.
Reverse search operation has been improved.
•
Mark information was not recorded to a CF card in
•
COMPACT FLASH SLOT 2 in some cases. This issue has
been corrected.
When playing back continuous takes created by
•
pressing the REC key during recording, setting marks
became impossible. This issue has been corrected.
If recording was stopped immediately after starting
•
with pre-recording, the unit would freeze on rare
occasions. This issue has been corrected.
When Recording with “LR 2MIX” on, more than 999
•
takes could be created in a folder. This issue has been
corrected.
When the file mode was set to “POLY”, if only the “LR
•
2MIX” was recorded, the unit would freeze. This issue
has been corrected.
When, for example, the time code generator mode was
•
set to
JAM
SYNC
the
POWER
OFF
GEN
function would
not work properly in some cases. This issue has been
corrected.
If there were more than 100 subfolders and files in a
•
folder, that folder could not be deleted in some cases.
This issue has been corrected.
In a project with the sampling frequency set to 96
•
kHz, a part of recording data could be lost on very rare
occasions. This issue has been corrected.
If both channels 1 and 2 were set as digital inputs and
•
unlocked, the voice memo and slate tone functions did
not work correctly. This issue has been corrected.
When inserting a CF card into a slot, even if it contained
•
a project,
NO
PROJECT
would be displayed on rare
occasions. This issue has been corrected.
Checking the firmware version
Before conducting a firmware update, check the firmware
version currently installed in your HS-P82.
1 Turn the unit power ON.
2 Press the MENU key on the front panel to open the
MENU
screen.
3 Press the
VERSION
INFO
button.
Check the
SYSTEM
VERSION
here. If this firmware
version is the same as or newer than the version
that you intend to use for updating, there is no
need to update the unit.