Tascam HS-4000 Скачать руководство пользователя страница 53

Страница: 53 / 152

TASCAM HS-4000

7 – Timeline mode

Playback

Project/session selection

1. Press the PROJECT key on the front panel to open the

PROJECT screen.

2. Touch the

button next to the project that you want to

play to open the session selection screen.
If it is not the current project, a pop-up window appears

confirming that you want to load it.

3. Touch a session name button to select that session.
4. Touch the MENU button to open a pull-up menu and touch

the LOAD button.
The “Load selected Session?” pop-up appears.

5. Touch the OK button.

When loading completes, the Home Screen opens.

Setting input monitoring

Turn input monitoring OFF for the channels (tracks) that you

are playing back. For channels that have input monitoring ON,

audio input through the input connectors is output.
1. Touch the REC/MON button on the Home Screen to open a

pull-up with REC and MON buttons.

2. If input monitoring is on for any playback channels (MON

buttons appear blue), touch those MON buttons to turn

them off (turning them gray).

Setting the online function

Refer to “Online functions” on page 122 as you make online

output settings.

Locating to playback starting points

You can locate to the time where you want to start playback

using the

[

] and

[

] keys and the mark

jumping and manual locate functions. When timecode synchro-

nization is ON, playback will occur at the input timecode, so

locating as described above is not necessary.

Playback

Press the PLAY key to start playback.
Press the PAUSE key to start playback standby.
To end playback standby, press the PLAY key.
Press the STOP (RETAKE) key to stop playback.
Press the

[MARK

] key or

[MARK

] key to skip

to the start of another region.
Press and hold the

[

] key or

[

] key to search

backward or forward.
While pressing and holding the SHIFT key, press the XXX [MARK

X] key or/[MARK X] key to jump to a mark.
Press and hold the

[

] or

[

] key while pressing

and holding the SHIFT key to search at high-speed.
While pressing the STOP key, press the

[MARK

] or

[MARK

] key to skip to the beginning of the first region

recorded or the end of the last region. (This only works with the

front panel keys.)

NOTE

Playback functions can also be used via parallel control.

Call function

Press the CALL (CHASE) key to locate to the point where

playback was last started from playback standby (call point) and

put the unit in playback standby mode.

Содержание HS-4000

























































































































































Результаты поиска

Содержание HS-4000

Отзывы:

Похожие инструкции для HS-4000

Бренды по названию

Популярные бренды

Tascam HS-4000, Руководство пользователя

Результаты поиска

Содержание HS-4000

Отзывы:

Похожие инструкции для HS-4000

Бренды по названию

Популярные бренды