40
TASCAM DR-05
2 The
Â
or
¯
button is used to adjust the
input level. Press the
Â
or
¯
button to
show a pull-up menu screen for input level
setting.
If the input is too high, the PEAK indicator on
the upper left above the display lights.
A
¶
mark is provided at -12dB on the level
meters. Set the input level so that the indicator
bars move to and fro with this mark at about the
center without causing the PEAK indicator to
light red when the loudest sounds occur.
NOTE
• Press the
(
HOME
) [
ª
]
button to exit recording
standby.
• When in recording standby or during recording, the
speaker does not output sound even if the
SPEAKER
setting is enabled. Connect headphones to the /
LINE
OUT
jack if you want to adjust the level or record while
monitoring the input. Use the
+
or
−
button in the Home
Screen to adjust the monitoring volume. This does not
affect the sound to be recorded.
4–Recording