manualshive.com logo in svg

Tascam DP-006, Руководство пользователя, Страница: 80 / 104

Поделиться
Скачать
Tascam DP-006 Скачать руководство пользователя страница 80

80

 

TASCAM  DP-006

11 – SD Card Management

SD card capacity and partition size

SD card capacity FAT partition size MTR partition size
32GB

4GB

2GB, 4GB, 8GB or 16GB

16GB

4GB

2GB, 4GB or 8GB

8GB

2GB

2GB or 4GB

4GB

2GB

2GB fixed

2GB

1GB

1GB fixed

1GB

512MB

512MB fixed

512MB

256MB

256MB fixed

NOTE

• 

The unit can handle a maximum of 4 MTR partitions, no matter how small 

you make them.

• 

When you insert an unformatted SD card, the unit will ask you to format 

it. At this time, however, you cannot choose the size of the MTR partitions. 

If you want to change the sizes, follow the procedures above to format the 

card.

4.  If the capacity of the SD card is 8 GB or less, press the F2 [EXEC] button. 
 

If the capacity of the SD card is more than 8 GB, use the DATA wheel to 

set the size of the MTR partition, and press the F2 [EXEC] button. 

 

A pop-up message warning that all songs will be erased appears.

5.  Press the F3 [YES] button to format the SD card.
 

For example, if you format a 16 GB SD card with 4GB MTR partitions, 12 

GB are left for MTR partitions after 4 GB is used for the FAT partition. Three 

partitions are created. Two are 4 GB and the last one is 3 GB. (Since 1GB is 

actually 1024 MB, the total size of the partitions does not always match 

the SD card size.)

NOTE

• 

When formatting finishes the 

CARD

 menu screen reopens.

• 

After formatting, one song is automatically created in each MTR partition.

• 

To cancel formatting, press the 

F4

 [NO] button. 

Содержание DP-006









































































































Отзывы:

Нет отзывов