Tascam DM-3200 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 36

Tascam DM-3200 Скачать руководство пользователя страница 11

3 – Automation overview : Displays

TASCAM DM

Automation Guide

11

Rehearse

Rehearse is a special status that works with Write,
Trim and Static modes. Rehearse allows you to

practice or experiment with mix moves without
recording them.

Displays

The automation display screens on the TASCAM
DM described below are used for the following pur-
poses:

• Enabling/disabling the automation system

• Setting operational preferences

• Setting the master Auto Fade Out time

• Displaying used/available memory

• Over-riding the automation system’s automatic

mode switching

• Copy/paste of configuration between channels

• Mix file management

In all automation displays, the cursor is moved by
using the cursor keys, located to the lower right of
the display.

AUTO SETUP

Check boxes are enabled/disabled by moving the
cursor to the check box and pressing the

ENTER

key.

Time values are entered by moving the cursor to the
desired box, changing the value with the wheel then
pressing the

ENTER

key. Time values flash until con-

firmed with the

ENTER

key.

To access the automation displays, press the

AUTO-

MATION

key. Repeatedly pressing the

AUTOMA-

TION

key (or using the POD 1 encoder and switch)

toggles between the displays.

AUTOMATION ENGINE

This on-screen button

enables/disables the TASCAM DM’s automation
system.

When enabled,

AUTO

is displayed in the upper left of

the display with the currently selected channel, in all
mixer displays.

No automation data will be recorded or played back
when the automation system is disabled.

AUTO STORE

The

AUTO STORE

option enables or

disables automatic storage of mix data.

When turned on, there are two sub-options:

OVER-

WRITE

, which throws away the previous mix data, and

KEEP

, which keeps the previous mix data as a backup.

KEEP CONFIRMATION

When enabled, a pop-up

box will ask for confirmation before performing a
Keep operation. A Keep operation saves a copy of
the current mix, pushing older mixes “down the
stack”. If all space for mixes is is taken, the Keep
operation will delete the oldest (unprotected) mix.
All mixes saved using Keep are numerically
sequenced with highest numbers being the latest
mixes.

The default value of this check box is on (keep con-
firmation is enabled).

AUTOMATION MODE MULTI PASS

Nor-

mally, the mixer exits Global Write or Global Trim
mode when it is no longer receiving timecode.

When this check box is enabled, the mixer remains in
Global Write or Global Trim mode until the mode is

Figure 6: AUTO SETUP screen

«
...
9
10
11
12
13
...
»

Содержание DM-3200





































Отзывы:

Нет отзывов