14
TASCAM DP-03SD
2 – Quick Start Guides
5 Return to the beginning of the song and start playback of
the recorded rhythm guitar. Play the lead guitar part along
with the recording.
Raise the TRACK 2 fader to hear both the playback of TRACK
1 and input guitar signal through your headphones.
6 As necessary, use the TRACK 1 and 2 faders, PAN knobs,
MASTER fader and PHONES LEVEL knob to adjust the
monitoring level and balance.
7 Return to the beginning of the song, press and hold the
RECORD (
º
) button and press the PLAY (
Á
) button to start
recording. Perform the lead guitar part.
The RECORD (
º
) button lights red, and the TRACK 2 REC
indicator stops blinking and stays lit.
8 When you are done performing, press the STOP (
ª
) button
to stop recording.
9 Press the TRACK 2 REC button to end record standby. Its
REC indicator becomes unlit.
Recording a vocal to TRACK 3
1. Press the ASSIGN button to open the
INPUT ASSIGN
screen.
2 Press the TRACK 3 REC button to set the
SOURCE
for
TRACK 3
to
B
.
3 Press the HOME button to return to the Home Screen.
4 Press the TRACK 3 REC button.
Its REC indicator blinks and the unit enters record standby.
TRACK 3 REC indicator
