12
TASCAM DP-03SD
2 – Quick Start Guides
3 Use the INPUT A TRIM knob to adjust the guitar input level.
Set the TRIM knob so that the OL indicator for INPUT A
does not light even when the loudest sound to be recorded
is input.
If the OL indicator continues to light even when the TRIM
knob is turned down, the guitar signal itself is too loud. In
this case, lower the output level on the guitar.
OL indicator
When you play guitar, the input level is shown by the level
meters for “
” (INPUT A) and “
” (TRACK 1) on the
display.
When you raise the TRACK 1 fader, the MASTER fader and
the PHONES LEVEL knob, you can hear the sound of the
guitar through the headphones, and the
and
level
meters move.
NOTE
• Use the
TRACK 1
PAN
knob to set the stereo position when
monitoring.
• When the
TRACK 1
REC
indicator is unlit, the input cannot
be heard.
Recording a guitar to TRACK 1
1 Press and hold the RECORD (
º
) button and press the PLAY
(
Á
) button to start recording. Play the guitar.
The TRACK 1 REC indicator stop blinking and stays lit.
TRACK 1 REC indicator
2 When you are done performing, press the STOP (
ª
) button
to stop recording.
3 Press the TRACK 1 REC button to end record standby. Its
REC indicator becomes unlit.
