Spirit Digital 328 v2
2
Connect audio connections as shown in the diagram below. A Tascam TDIF cable must be
connected from the TDIF port of the DTRS machine to the TDIF Port A of the 328.
The TDIF connection allows two way digital transfer between the 328 and the Tascam DTRS.
The outputs of the 328 can be configured to be either direct outputs for input channels 1-8 to the
DTRS, or the Digital 328’s 8 Group outputs.
Besides the audio connections, a BNC Wordclock cable must be connected from the 328
Wordclock Out to the DTRS Wordsync Input to synchronize the transmission of the samples.
328 TDIF 1
Î
DA-88 TDIF Port
Tascam DA-88
Digital 328
1
Connecting The System
Connecting The System
Connecting The System
Connecting The System
Audio Connections
Audio Connections
Audio Connections
Audio Connections
Synchronization Connections
Synchronization Connections
Synchronization Connections
Synchronization Connections
If MIDI Timecode (MTC) and MIDI Machine Control (MMC) are to be
used to transmit timecode, transport controls and record arming, it is
essential that and SY-88 board is fitted to the DA-88.
A MIDI cable
must be connected from the 328 MIDI Out to the SY-88 MIDI In and a
MIDI cable must be connected from the SY-88 MIDI Out to the 328
MIDI In.
NOTE
