Tascam Celesonic us-20x20, Справочное руководство

Страница: 9 / 44

TASCAM US-20x20
9
3 – Installation
When the “'US-20x20.pkg' can't be opened because it was
not downloaded from the Mac App Store. Are you sure you
want to open it?” security warning message appears, click
the “Open” button.
This warning message might also appear when the
Gatekeeper setting is something other than “Allow applica-
tions downloaded from: the Mac App Store”.
The file still might not open and “'US-20x20.pkg' can't be
opened because it was not downloaded from the Mac App
Store.” might appear again.
In this case, copy the file from the folder where it is to the
desktop or another folder, and then open it. Alternatively,
change the Gatekeeper setting to “Allow applications
downloaded from: the Mac App Store and identified devel-
opers” and try opening it again.
8
Changing the Gatekeeper setting
The Gatekeeper setting can be changed using the “Allow
applications downloaded from:” item on the “General” page
of the “Security & Privacy” pane of the System Preferences.
To change this, you must click the lock icon ( ) at the
bottom left and enter a password to unlock the settings.
This setting will lock again when you quit the System Prefer-
ences by typing command-Q or clicking the button, for
example, or when you click the “Show All” button to close
the open pane.
CAUTION
Changing the Gatekeeper setting could result in security
risks.
If you changed the Gatekeeper setting to decrease security
(use one of the lower settings), set it back to the original
setting after updating the driver and/or firmware.
Uninstalling the dedicated software
NOTE
Normally, there is no need to uninstall a driver or Settings
Panel. Follow these procedures if a problem occurs or you no
longer intend to use the unit with the computer.
8
Windows
Uninstall from the “Programs and Features” Control Panel.
1. From the Start menu, open the Control Panel application,
click Programs and then click Programs and Features.
NOTE
•
In Windows 10, right-click the Start button and click the
Control Panel that appears.
•
In Windows 8, to open the Control Panel, right-click the
Start screen and click the All apps button (or

button that
appears at the bottom left of the screen in Windows 8.1).
2. If “View by:” is set to “Category", click “Uninstall a program”
under the “Program” item.
If “View by:” is set to “Large icons” or “Small icons", click
“Programs and Features”.
3. Double-click “TASCAM US-20x20 version X.XX” ("X.XX” is the
driver software version) in the list.
4. Then, follow the instructions that appear on the screen.
8
Mac
Delete “US-20x20” from the Application folder to complete
uninstallation.