14
— TASCAM CD-BT1
TASCAM CD-BT1 —
15
Using effects
How effects work
ere are five slots numbered from
1
through
5
where you can store your
own effect settings
ffects are created from the preset
effects available hen a slot is se
lected if a preset effect is recalled and
edited that slot is automatically filled
with the edited effect
Storing your own effect settings
in a slot
ress the
EFFECT
key to select the slot
1
through
5
as shown on the display
ress and hold the
EFFECT
key or press
the
LCD MENU
key until
EFFECT
ap
pears on the display
or
se the
6
key to turn the effect
ON
ress
ENTER
and then select the
preset effect
00
through
15
with the
6
and
fl
keys
NOTE
If there were any settings in the selected slot
to start with, they will be overwritten when
you recall a library entry.
ress
ENTER
once more to start edit
ing the parameters with the the
6
and
fl
keys see the table for details of these
parameters
e last parameter is always
LVL
the
output level from the effect unit
0
to
64
is is only available when the ef
fect is active and is bypassed with the
effect off
et the level and then press the
DISPLAY/ESC
key to exit the effect
settings e effect settings you have
made are automatically stored in the
slot you first chose
Recalling an effect with your
settings
hen you have stored the effect set
tings in a slot as described above you
can recall them simply pressing the
EFFECT
key to select the appropriate
slot you should also make sure that the
effect is switched on
TIP
If you have a footswitch connected and the
FOOT
menu item is set to
EFF
, you can step
through the slots by pressing the footswitch.
