background image

To display the total program time

In the Program mode, press the TIME but-
ton to display the total program time.
Pressing the TIME button again will return
the CD player to the Program mode.

To review the program contents

1. Press the CHECK button in the Program

mode.

The first programmed track number will
light and "P-01" will blink in the display.

2. Each time the CHECK button is pressed,

the next programmed track number will
light.

"P-XX (Program number)" will blink in the
display. 

O

When the last programmed track num-
ber is displayed, pressing the CHECK
button will return the CD player to the
Program mode, allowing you to add
tracks to the program. 

O

The track numbers stored in the pro-
gram memory will be displayed on the
music calendar. However, please note
that the calendar can handle only up to
track 20. If higher track numbers are
entered in the Program memory, the
OVER indicator will light.

To cancel a programmed track

Pressing the CLEAR button will cancel the
last programmed track.

Delete programming

This is the opposite to normal pro-gram-
ming, and is used to program tracks which
are not to be played. Use it when there are
tracks on the disc you don't want to listen
to.

1. Press the STOP (

) button.

2. Press the DELETE button.

The CD player enters the Delete
Program mode.
The "DELETE" and "PGM" indicators light
in the display.

3. Alternately press the 

Ú

SKIP 

Æ

button(s) and the PROGRAM button in
any desired order.

4. Press the CD PLAY (

) button.

Delete-programmed playback starts.

O

In the Delete-Program mode, pressing
the TIME button will display the total
time of the non-deleted tracks. Pressing
the TIME button again will return the
player to the Delete-Program mode.

O

Pressing the CHECK button in the
Delete-Program mode will display the
first deleted track number.
Each time the CHECK button is pressed,
the next deleted track number will be
displayed. When the last deleted track
number is displayed, pressing the
CHECK button will return the player to
the Delete-Program mode, allowing you
to delete other tracks. 

O

Pressing the CLEAR button will cancel
the last delete-programmed track.

O

Pressing the STOP 

(

button when the

player is stopped will clear the delete-
program memory.

The program playback function allows you
to program up to 20 tunes (tracks) for play-
back in any desired order.

Programming required tracks

1. Press the STOP (

) button.

2. Press the PROGRAM button.

The player enters the Program mode.
The PGM indicator lights in the display.

3. Alternately press the 

Ú

SKIP 

Æ

button(s) and the PROGRAM button in
the following order.

4. Press the CD PLAY (

) button.   

Programmed playback starts from the
first programmed track.

O

Programming tracks is possible only
when the player is in the Stop mode.

O

The programmed contents will be held
in memory even after programmed play-
back has been completed or when pro-
grammed playback is stopped by press-
ing the STOP (

) button.

O

When the STOP (

) button is pressed in

the stop mode, the contents of the pro-
gram are erased.

O

To release the program mode, press the
PROGRAM button again.

O

During program playback, the TOTAL
REMAIN time display shows the total
remaining time of the programmed
tracks, from the current position.

O

If a track with a number higher than 32 is
being played, the remaining time will not
be displayed in the time counter even
when the TIME button is pressed.
Instead, "nn:nn" will be indicated on the
time indicator.

Program Playback

Example

To program tracks in the order 5 

@

@

8 in the Stop mode.

Содержание CD-A700


















Отзывы: