background image

52 

TASCAM CD-9010CF

12 – Troubleshooting

If the unit is not functioning properly, please check the following 

items before calling for service. If you are still unable to resolve 

the problem please contact the retailer where you purchased 

the unit or TASCAM customer support (see the back cover).

Power does not turn on

 

8

Confirm that the power plug is inserted completely.

Media is not detected

 

8

Confirm that the CD or CF media is loaded properly. 
Stop playback or recording once.

Unit cannot be controlled 

 

8

Confirm that the panel lock function is not on.

Unable to playback a file

 

8

If it is a WAV file, confirm that it uses a sampling frequency 

(44.1 kHz or 48 kHz) and a bit rate (16 or 24) that are 

supported by this unit.

No sound

 

8

Confirm the connections with the monitoring system and 

check the volume of the amplifier.

Changed settings are not saved

 

8

This unit backs up settings whenever you change them. This 

backup could fail if you turn off the power while this data 

is being written, so do not turn the power off immediately 

after changing a setting.

I hear noise

 

8

Check if any connecting cable might have a bad connection.

When editing text, “Name Full” appears

 

8

Due to limitations of the system, folder names can be a 

maximum of 52 characters (single-byte) long. A full path 

on the 

BROWSE

 screen cannot exceed 255 characters. For 

example, for a file or folder within a subfolder, the maximum 

number of characters is 255, including folders above it and 

all separators.

Содержание CD-9010CF

























































Отзывы: