TASCAM CD-200iL
25
4 – CD playback
Time and text information display
You can set what type of time and text information is shown on
the display.
Press the DISPLAY [SHIFT] button on the main unit or the
DISPLAY button on the remote control to show for two seconds
the type of information (playback time or text information) that
is currently set to appear in the main area of the display. Press
this button again while this is being shown to change the type
of information displayed.
When changing, the types of information that can be displayed
differ depending on the type of disc loaded, its status and the
operation state of this unit.
8
Audio CDs with CD text
When playing back or paused, you can change the infor-
mation shown on the display, cycling through track elapsed
time, track remaining time, total remaining time, track title
and track artist.
You can also change the information shown when stopped,
but the display cycles through total time, album title and
album artist.
8
Audio CDs without CD text
When playing back or paused, you can change the infor-
mation shown on the display, cycling through track elapsed
time, track remaining time and total remaining time.
You can also change the information shown when stopped,
but the display switches between total tracks and total time.
8
Data CD
When playing back or paused, you can change the infor-
mation shown on the display, cycling through track elapsed
time, track title, track artist and file name.
When stopped, you can still change the display mode from
the track elapsed time to the album title.
When stopped, you can switch to the album title (current
folder).
NOTE
•
After pressing the
DISPLAY [SHIFT]
button on the main unit
or the
DISPLAY
button on the remote control, the currently
selected type of information to be shown on the main
display appears for two seconds as follows.
Track elapsed time:
ELAPSED
Track remaining time:
REMAIN
Total remaining time:
T REMAIN
Album/track title:
TITLE
Album/track artist:
ARTIST
File
name:
FILENAME
•
The text information shown on the display is CD text infor-
mation for audio CDs and ID3 tag information for data
CDs. When information is not included for a disc or file,
NO
TITLE
(title information) or
NO NAME
(artist information)
is shown. If the information contains characters that cannot
be displayed, those characters are replaced by
_
.
•
When an audio CD is in programmed playback mode the
elapsed time and remaining time of the entire program is
shown.
•
The display contents setting is retained even when the
power is turned off.
