Tascam 24, Руководство пользователя

Страница: 52 / 164

52
TASCAM Model 24
11 – USB audio interface functions
Installing the Mac dedicated software
NOTE
i
Install the Mac dedicated software on the computer before
connecting the unit to it with the USB cable.
i
Depending on the Gatekeeper setting, a warning message
might appear during installation. Please see “Working with
Gatekeeper” on page 52 for information about Gatekeeper.
Mac dedicated software installation proce-
dures
1.
Download the latest dedicated software for the operating
system you are using from the TEAC Global Site ( http://
teac-global.com/ ) and save it on the computer to be used
with the unit.
2.
Double-click “ TASCAM_MODEL MIXER_Installer_x.xx.dmg ”,
which is the saved disk image file for the Mac dedicated
software, and double-click “ ModelMixer_Installer.pkg ”
inside the folder that opens.
NOTE
Depending on the computer’s settings, the downloaded zip
file might not have been uncompressed automatically. In this
case, uncompress the zip file first and then double-click the
disk image file.
3.
When the installer starts, click the “
Continue
” button.
4.
Next, select the desired language and click the “ Continue ”
button.
5.
Click the “Read License” button and check the contents of
the Software License Agreement. If you agree to the con-
tents of the license, click “Agree”.
Then, click the “ Next ” button.
6.
Next, click the “ Install ” button to start installation.
7.
The following screen appears when installation has com-
pleted.
Click the “Close” button.
Working with Gatekeeper
When using macOS, depending on the Gatekeeper security
function setting, a warning message might appear during
installation.
The solution depends on the warning message shown.
See the following explanations for details.
When the Gatekeeper setting is “Allow ap-
plications downloaded from: the Mac App
Store”
The following security warning might be shown: “ ‘ModelMix-
er_Installer.pkg’ can’t be opened because it was not down-
loaded from the Mac App Store. ”
In this case, click the “ OK ” button to close the message. Then,
control-click (or right-click) the file and click “ Open ” in the
menu.
When the “
‘ModelMixer_Installer.pkg’ can’t be opened be-
cause it was not downloaded from the Mac App Store. Are you
sure you want to open it? ” security warning message appears,
click the “ Open ” button.