Tascam 202mkV, Руководство пользователя

Страница: 21 / 28

IMPORTANT SAFETY INSTRUCTIONS
TASCAM 202
MK
V
21
4 − Recording
Dubbing (from TAPE 1 to TAPE 2)
1. Insert a cassette tape for playback into the
TAPE 1 compartment and a cassette tape for
recording into the TAPE 2 compartment.
Side “A” facing you
2. Set the tape transport direction on both decks.
If the play/record direction indicator (
˙
/
¥
) on
the display points in the direction opposite to the
one desired, press the
PAUSE key followed by the
PLAY (
˙
or
¥
) key corresponding to the desired
direction.
After changing the tape transport direction, be
sure to press the
STOP
(
H
) key to get out of the
pause mode.
NOTE
Be careful not to press the PLAY (
• ˙
or
¥
) key
whose arrow points in the same direction as the
indicator. Doing so will start playback.
Set the REV MODE switch as required.
•
You don’t need to adjust the recording level or
•
set the Dolby NR system, as both depend on the
pre-recorded source tape.
3. Press either
DUB START
key to start dubbing.
For normal speed dubbing, press the
NORMAL
key. For high-speed dubbing, press the
HIGH
key.
NOTE
High-speed dubbing makes a copy at approxi-
mately two times the normal speed. We rec-
ommend normal speed dubbing for best audio
quality.
During dubbing, either the NORM DUB or HIGH DUB
indicator lights steadily on the display.
During normal speed dubbing, only the following
keys work:
TAPE 1 deck:
STOP
(
H
)
TAPE 2 deck:
PAUSE
,
REC MUTE
,
STOP
(
H
)
During high-speed dubbing, only the STOP (
H
)
key works.
Pressing the
STOP
(
H
) key on either deck stops
both tapes at once.
Neither DUB START key works immediately after
the tape is fast-forwarded or rewound to the end.
Wait for 5 seconds or more before pressing the
key.
NOTE
During dubbing, the pitch control does not
•
work.
Recording level adjustment is not necessary for
•
dubbing, as the recording level is set to the level
of the pre-recorded tape. Operating the
INPUT
control, before or after starting dubbing, has no
effect at all.
If a nearby television set is switched on during
•
high-speed dubbing, a high-pitched interfer-
ence noise may be recorded on the tape. To
avoid this, either perform dubbing at normal
speed, or turn off the television.