Making various DAW application settings
4.
Click “New” > “Install…”
5.
Select “Manufacturer: Mackie Designs” and “Model: Mackie
Control”, and click “Add”.
6.
For Device: Mackie Control, set the Output Port to “Model
12 DAW Control OUT”.
7.
For Device: Mackie Control, set the Input Port to “Model 12
DAW Control IN”.
The
8
button on the Model 12 will light, showing that
remote control is enabled.
Controls that can be used with the DAW
The following Model 12 controls can be used to operate the
DAW application.
o
F2
button (DAW CONTROLLER TRACK screen)
o
F3
button (DAW CONTROLLER TRACK screen)
o
F4
button (DAW CONTROLLER TRACK screen)
o
MULTI JOG dial (locate function)
o m
/
,
buttons
o 8
button
o 7
/
9
button
o 0
button
o
PAN knobs (1-6, 7/8-9/10)
o
REC buttons (1-6, 7/8-9/10)
o
MUTE switches (1-6, 7/8-9/10)
o
SOLO switches (1-6, 7/8-9/10)
o
Channel faders (1-6, 7/8-9/10)
o
FX fader (master fader control)
ATTENTION
Immediately after connecting with the DAW as well as after
settings have been made in the DAW, the DAW settings and
the state and positions of the Model 12 buttons, knobs and
faders will not match. In this case, adjust the DAW settings to
match the Model 12 settings, or use the Model 12 buttons,
knobs and faders to match the DAW settings.
TASCAM Model 12 DAW Controlmode Manual
13