TAS TAS-Link III, Краткая инструкция

Страница: 9 / 44

9
2.2.1 Content of the standard accessories kit 00-12-5004006
Content Description
8x 10k
Ω resistor 5% / ¼ W
Terminating resistors 10k
Ω for the lines
3x dowel S 8x40 Dowels for the fixing screws
2x screw 5x60 Fixing screws for the housing (bottom)
1x screw 5x50 Fixing screw for the housing (top)
6x cable tie 150mm Strain relief for the supply cables
1x type plate Type designation, serial no. etc.
1x sticker MAC address Sticker showing the MAC address of the device
1x cable clamp 10mm Cable clamp for 230V supply cable
1x jumper Jumper for C-Tec NT560-12/E (is not required)
1x distance bolt M3x45mm Mounting for the battery
2x cable clamp 5mm
Cable clamps for the earthing of the insulating shell/earthing wire of
supply cables at the housing
2x ratchet screw M3x6 Fixing screws for the cable clamps
1x adhesive seal 11mm Seal for the housing
1x lock washer 4,3mm inside Lock washer for M4x8 screw
1x ferrite Ferrite for 230V supply cable (only required at C-Tec)
1x oval-head screw M4x8 Screw for the cable clamp 10mm
1x drilling template G4 Drilling template for the G4/+ housing