Tarter RC306BL, Руководство по эксплуатации и сборке, Страница: 2 / 44

2
I N T R O D U C T I O N
TO THE OWNER:
Read this manual before operating your product. Keep this manual handy for reference.
Require all operators to read this manual carefully and become acquainted with all
adjustments and operating procedures before attempting to operate the equipment.
The equipment you have purchased has been carefully engineered and manufactured
to provide dependable and satisfactory use. Like all mechanical products, it will require
cleaning and upkeep. Lubricate the unit as specified. Please observe all safety information in
this manual and safety decals on the equipment. Use only genuine service parts. Substitute
parts will void the warranty and may not meet standards required for safe and satisfactory
operation.
THANK YOU FOR PURCHASING THIS PRODUCT
Congratulations on your purchase. You have purchased one of our dependable 3-point
implements. Through proper care and operation you can expect to receive many years of
service when maintained and used in accordance within the capabilities of this implement.
For more information and questions, please contact:
Customer Service: 1-800-RED GATE
CUSTOMER INFORMATION
Name
___________________________________________________
Purchased From
__________________________________________
Date Purchased
___________________________________________
Model
__________________________________________________
Serial #
_________________________________________________
PREPARATION CHECKLIST
Verify the following before operating your Rotary Cutter
1. Rotary Cutter is completely assembled.
2. Gearbox filled with oil and checked for
possible leaks. (See page 15)
3. All fittings lubricated. (See page 23-24)
4. All shields in place and in good condition.
5. All fasteners torqued to specifications in
Torque Chart. (See page 31)
6. Check PTO driveline. Make sure it is the
correct length to operate rotary cutter
with intended tractor.
7. Check front of input gearbox shaft and
make sure that snap ring is properly
installed.
8. Check shear/retaining bolt for proper
grade and installation. (See page 27)
9. All decals in place and readable. (See
page 8 - 9)
10. Overall condition good. (i.e. paint,
welds)