Tarter PFQA Скачать руководство пользователя страница 5

Страница: 5 / 28

THE BEST SAFETY DEVICE IS AN INFORMED, CAREFUL OPERATOR.

WE ASK YOU TO BE THAT KIND OF OPERATOR.

YOUR SAFETY is our concern. We design and manufacture our implements with this in mind. Our design can’t

eliminate an operator’s careless actions. Hazard control and accident prevention are dependent upon the awareness,

concern, judgment, and proper training of personnel involved in the operation, transport, maintenance and storage of

equipment.

CALIFORNIA PROPOSITION 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov

Throughout this manual, the term

IMPORTANT

is used to indicate that failure to observe procedures can cause

damage to equipment. The terms

CAUTION, WARNING

and

DANGER

are used in conjunction with the Safety-Alert

Symbol, (a triangle with an exclamation mark), to indicate the degree of hazard for items of personal safety.

This Safety-Alert Symbol indicates a hazard and means ATTENTION!
BECOME ALERT! YOUR SAFETY IS INVOLVED!

Indicates an imminently hazardous situation that, if not avoided, will
result in death or serious injury.

Indicates a potentially hazardous situation that, if not avoided, could
result in death or serious injury, and includes hazards that are exposed when guards are
removed.

Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury.

Indicates that failure to observe can cause damage to equipment.

Indicates helpful information.

SAFETY

WARNING

CAUTION

IMPORTANT

NOTE

Содержание PFQA





























Результаты поиска

Содержание PFQA

Отзывы:

Бренды по названию

Популярные бренды

Tarter PFQA, Руководство по эксплуатации и сборке

Результаты поиска

Содержание PFQA

Отзывы:

Бренды по названию

Популярные бренды