U s e r M a n u a l M D T 8 0 0 0
| 14
Pin Point Procedure:
MDT 8000 metal detector has a Double–D search coil configuration. The search coil’s most sensitive area
is along the search coil longitudinal centerline. The metal detector will give the loudest response when a
target is directly beneath it.
MDT 8000 has a high resolution, numerical signal strength indicator with range from 0-99 and amplitude
and frequency modulated sound associated with the target signal strength.
Pin Point:
1. Lower the search coil approximately 1” above the ground surface, 10”-12” from the estimated target
position.
2. Press and hold the “PP” button.
3. Holding the search coil parallel to the ground surface, sweep it across the target.
4. The detector will produce the loudest sound, highest tone, and the largest signal strength numbers
when the target is beneath the center line of the search coil.
