TAROT
@2016 TAROT All Rights Reserved.
9
IV. Flight Test
Steps:
1. Please ensure all the wirings are correct and the power supply is in great condition.
2. Turn on the transmitter.
3. Powering up the gimbal and keep it still. After self-check and sensor initialization process, gimbal angle
corresponds to INIT ANGLE in the assistant software.
4. Switch from different working modes to check the rotation direction in ROLL, PITCH, and PAN axis.
TIPs:
Before flight test, please ensure:
1. Correctly mount the camera into the gimbal and the gimbal onto the landing gear.
2. All the wirings are correct.
3. The camera and transmitter have correctly set.
Gimbal Self-check and Sensor Initialization:
1. After powering up the gimbal, it enters self-check procedure. When RED, YELLOW, BLUE lights flash twice
at the same time, self-check finishes.
2. After self-check process, camera lens face straight down, it enters sensor initialization process. Keep the
gimbal still in this process. Initialization will last for a relatively long time if the sensor deviation or drifts are large.
3. After sensor initialization process finishes, gimbal angles corresponds to INIT ANGLE in the assistant
software.
