6
Targus Wireless RF Mouse
You are now ready to set the radio frequency channel and
establish a communications link between the mouse and its
receiver. See “Establishing a Communications Link” on page 6
Establishing a Communications
Link
After your computer detects the USB receiver and the driver
software is installed, you must establish a communications link
between the mouse and its receiver BEFORE you can use the
mouse. To establish this link, you need to set the identification
code so that the mouse works properly.
Setting the Identification Code
Make sure that your computer is turned on and has detected the
USB receiver before you establish a communications link.
1 Press and release the link button on the receiver.
Sample receiver
The receiver’s status light glows when the receiver is
activated.
2 Press and release the reset button, located on the bottom of
the mouse.
Link button
