Wireless laser Stow-N-Go
TM
Rechargeable Notebook Mouse
Installing the Batteries
(1)
(2)
DPI switching
button
1. Remove the battery cover from the back of the mouse. Lift the
cover off from the back of the mouse.
2. Insert two AAA-size batteries, making sure that the positive (+)
and negative (-) ends of each battery match the polarity indicators
inside the battery compartment. To replace the battery cover, place
the cover on top of the mouse and slide forward until it clicks into
place.
NOTE: WHEN POWER IS ON, THE MOUSE GOES INTO “SLEEP MODE” AFTER 8
MINUTES OF INACTIVITY. TO ACTIVATE THE MOUSE, PRESS ANY MOUSE KEY.
NOTE: WHEN THE BATTERY IS LOW, THE LOW POWER INDICATOR LIGHT
LOCATED IN THE DPI SWITCHING BUTTON WILL FLASH.
3
