5
Windows
®
2000/XP Operating Systems
1 Turn on your computer.
The Found New Hardware Wizard appears.
If it does not, the operating system has installed the default
driver automatically. No other steps are necessary.
2 Click
Next
.
The wizard searches for the appropriate device driver.
3 Click
Next
.
4 Click
Finish
to complete the driver installation
You are now ready to begin using your keypad.
Using the USB Calculator/Keypad
Turning the Keypad Off and On
To turn on the keypad, press the CE/AC key, located directly
above the number seven key. The keypad starts in calculator mode
and displays “0.”
The keypad automatically turns itself off after three minutes and
50 seconds of non-operation. There is no “off” key.
Switching Between Calculator and Keypad Mode
This Targus accessory operates as a calculator or as a keypad.
When the device is in calculator mode, the LED indicator light,
located next to the NRC key, does not glow. When the device is in
keypad mode, the LED glows green. To switch between the two
modes, press the
MODE
key.
NOTE: The NumLock key on your computer will not affect the
NumLock status of the keypad.
