9
Upgrading to the Enhanced Performance Driver
Upgrading to the enhanced driver from the supplied CD enables you to view DVD movies and
increases DVD performance. To do this:
1
From your desktop, right-click the
My Computer
icon and click
Properties
.
2
Select the
Hardware
tab and click
Device Manager
.
3
Locate
IDE ATA/ATAPI Controller
and click
+
to expand the list.
4
Double-click
PCMCIA IDE/ATAPI Controller
, select the
Driver
tab and click
Update Driver
.
The Upgrade Device Driver Wizard appears.
5
Click
Next
.
The Install Hardware Device Drivers screen appears.
6
Select “Search for a suitable driver from my device (recommended)” and click
Next
.
The Locate Driver Files screen appears.
7
Insert the driver software CD into your computer’s CD-ROM drive, select
CD-ROM drives
so
that a check mark appears in the check box and click
Next
.
8
Click
Next
again to confirm selection of the driver.
9
If the Digital Signature Not Found dialogue box appears, click
Yes
to continue.
The enhanced performance driver loads from the CD-ROM.
10 Click
Finish
to complete the driver installation.
Windows NT
®
4.0 Operating System
1
Turn on your computer.
2
Insert the driver software CD into your computer’s CD-ROM drive.
3
Click
Start
,
Run
then enter
D:\DOS_NT40\SETUP.EXE
(where
D:
is the path of your CD-ROM
drive) and click
OK
.
The driver software agreement screen appears.