Targus Optical Kaleidoscope USB Mouse
If it does not, the operating system has installed the
default driver automatically. No other steps are
necessary.
3 Click
Next
.
The wizard searches for the appropriate device driver.
4 Click
Next
.
5 Click
Finish
to complete the driver installation.
W
HEN THE MOUSE IS PLUGGED IN AND THE DEFAULT DRIVER IS
INSTALLED
,
THE
7
LIGHTS WILL TURN ON AND ROTATE FOR AS
LONG AS THE POWER IS ON
.
You are now ready to use the mouse.
Maintaining the Mouse
To improve the performance of your mouse, keep it free
of dust and dirt by following the cleaning procedures
described below.
Cleaning the Optical Sensor
1 Unplug the USB connector from the computer.
2 Using a cotton swab and mild soap and water, gently
wipe the optical sensor until it is clean. Never scratch
the surface of the sensor.
3 Plug the USB connector back into the computer's
USB port.
4
