1 Remove the battery cover from the back of the keypad.
2 Insert the supplied battery, making sure that the positive (+) and
negative (-) ends match the polarity indicators inside the battery
housing.
NOTE: WHEN REPLACING THE BATTERY, YOU MAY USE ALKALINE OR OTHER
HEAVY-DUTY NIMH BATTERY.
AVOID MIXING NEW AND USED BATTERIES IN A DEVICE.
3 Slide the battery cover back into position until it “clicks” firmly into
place.
Keypad - back view
Installing the Battery
Targus Bluetooth Numeric Keypad with PC Multimedia Control
• To power on the device, use the on/off switch located on the back of
the keypad.
• To power off the device, use the on/off switch located on the back of
the keypad. This feature should be used when traveling to prevent
power loss.
Turning the Keypad On and Off
3
