Targus wireless keypad and opitcal mouse combo
Wireless Keypad
1 Remove the battery cover located on the bottom of the
keypad.
2 Insert the supplied batteries , making sure that the positive
(+) and negative (-) ends of each battery match the polarity
indicators inside the battery housing.
3 Turn on the keypad by sliding the Power switch on the back
side of the keypad to the “on” position.
Connecting the Receiver
Plug the USB receiver into an available USB port on your
computer.
You are now ready to set the identifi cation code to establish a
communication link with the receiver.
Power
Switch
Setup Key
7
