step 8: assemble drawer box
(H1)
x 4
wooden dowel
(H13)
x 2
small cam bolt
(H14)
x 2
small cam
(H15)
x 8
long flat-head
screw
8.1. Align flat-head screws with pre-drilled holes to attach drawer sides to drawer front. Do not over tighten screws.
8.2. Carefully tap small wooden dowels into place in drawer front and drawer back. Leave 1/2” of the dowels sticking out.
8.3. Screw-In cam bolts must be screwed down flush in drawer front and drawer back.
8.4. Refer to page 7 for instructions on how to use the cam lock system. Do not over tighten bolts.
8.5. Align flat-head screws with pre-drilled holes to attach drawer back. Do not over tighten screws.
5
1
arrowed sticker will point to
the back side of drawer face.
Align flat-head screws with pre-drilled holes to attach drawer sides to drawer front. Do not over tighten screws.
Carefully tap small wooden dowels into place in drawer front and drawer back. Leave 1/2” of the dowels sticking out.
