Target TGT-CU8-002, Руководство по сборке

Страница: 7 / 16

installing L-bracket
There are several "key points" to
L-bracket installation. Please review the
drawings and comments at right as well
as the assembly steps provided.
All units must be fastened to the wall.
Always mount L-bracket to a wall-stud.
The L-bracket is intended to be installed
on the top side of the top panel.
However, if you prefer more "hidden"
hardware or are stacking, you can cut
the back panel (in center at top) and
install the L-bracket under the top panel.
Install short end against wall/wall
stud; long end against unit.
Do not install this unit flush against the wall!
This unit requires a gap of between 1/2 inch and
1 inch to install properly.
For more hidden hardware, cut back panel before
installing and secure L-bracket under top panel.
See steps 4 and 5 for detailed installation instructions.
Manufactured by: S. Kijchai Company Ltd.
Address: M. 7 , Rayong, Thailand
Manufacture Date : 09/2019
Wall
stud.
Min
1/2 in.
Max
1 in.
Wall
stud.
Short
end
long end
Wall
stud.
Top Panel
Children have died from
furniture tipover. To reduce the
risk of furniture tipover:
ALWAYS
install tipover restraint
provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb
or hang on drawer, doors, or shelves.
NEVER open more than one drawer
at a time.
DO NOT defeat or remove the drawer
interlock system.
Place heaviest items in the lowest drawers.
This is a permanent label. Do not remove!