Target DCMA-4000-ANZ, Инструкция по эксплуатации

Страница: 6 / 8

6
DISCONNECTING SENSORS
Removing Sensor Connections
You can reset your Receiver to remove all the Sensors that
are connected to it.
•
Press and hold the Mode button until the lights flash.
•
Press and hold the Mode and Sound buttons together
for five seconds. The lights will flash quickly then turn
off. The Receiver has now disconnected all Sensors
configured to it.
•
To reconfigure Sensors, see page 4.
HAVING TROUBLE?
If you’re having trouble with the installation of your kit, or
have questions on how best to configure your kit, check
out the Frequently Asked Questions on our website.
www.bealert.co.nz/FAQ
ADJUSTMENTS.
CONNECTING ACCESSORIES
If you have purchased the Alert Receiver Plus you are able
to connect additional accessories such as Sirens or Lights
to your kit.
Instructions on how to connect these accessories are
available on our website.
HELP
.