Page 6 of 10
Rev 3
4 Using The Controller
Note
: Do not use any other controller for this blanket.
0 = Off
1 = Low Heat (Suitable for all night use)
2 = Medium Heat
3 = High Heat (For preheating the bed only)
0 = Off
•
To select the required heat setting, slide the “Temperature Select Slide Knob”
up or down to your desired setting.
•
The selected position will be indicated by lighting up the corresponding
Number in the Window.
i.e.
If Heat setting “1” is selected, Number 1 will show and will be
illuminated.
If Heat setting “2” is selected, Number 2 will show and will be
illuminated.
If Heat setting “3” is selected, Number 3 will show and will be
illuminated.
If Heat setting “O” (Off) is selected (at either end of the slide) “0” will
show but will not be illuminated.
Turn off and unplug the blanket when not in use for prolonged periods
..
Temperature
Select Slide
Knob
Heat Level
Indicator
