2
FINISH
STEP 3:
STEP 4:
STEP 1:
STEP 2:
PLACE THE TABLE TOP UPSIDE DOWN ON A FLAT,SOFT SURFACE.
ALIGN HOLES IN PART (B) OVER THREADS IN PART(A).
ATTACH PART(B) TO PART(A) .USING BOLTS AS SHOWN BELOW .
DO NOT COMPLETELY TIGHTEN BOLTS AT THIS POINT
ALIGN HOLES IN PART(C) WITH THREADS IN PART(B).
ATTACH PART(C ) TO PART(B).USING BOLTS AS SHOWN BELOW .
DO NOT COMPLETELY TIGHETEN BOLTS AT THIS POINT
FLIP TABLE OVER, ENSURE ALL LEGS ARE EVEN. ONCE EVEN, COMPLETELY
TIGHTEN ALL BOLTS AND COVER BOLT HEADS WITH CAP(F).
BE CAREFUL NOT TO OVERTIGHTEN AS THIS MAY DAMAGE THREADS.
.
YOUR TABLE IS NOW READY FOR USE.
