7
•
Fix the antenna permanently to the inside of the bumper. Use a 2-component sealant or thermal adhesive for
this purpose and make sure the surface is dry and clean. Fix the antenna at least at the marked points as
indicated by circles (see illustration 2).
•
This will prevent the radials from moving relative to the substrate. This movement can lead to fading and
thus to unwanted Blu Eye alerts.
Important: for maximum performance of Blu Eye, only the first or second green LED should be lit
at the selected antenna location.
EXIT ‘INSTALLER MODE’
•
Press and hold buttons 1 and 2 for 2 seconds; a beep sounds. The status LED lights up green.
•
Blu Eye is now ready for use.
•
Refer to the user manual for the operation and handling of Blu Eye.
ANTENNAS
The VCD dipole antenna supplied is suitable for most common situations and ensures good reception results. In the
unlikely event that the VCD dipole antenna cannot be used or maximum reception is desired, we offer a choice of
the following alternatives:
•
Modification of the existing sharkfin antenna: a modification of the sharkfin antenna is possible for almost
all car makes. This modification is carried out by Track Technologies’ technicians. Performance: better than
the VCD dipole antenna.
•
Plate antenna (18 cm long) with angled mounting base. Suitable for mounting on roof or rear spoiler.
Performance: better than the VCD dipole antenna.
