step 1: attach the back stretchers to the right side frame
5
NOTE:
DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
(H1) x 2
1/4”
x 13mm bolt
(H4) x 1
hex wrench
1.1. Orient and fit the back upper stretcher (E) onto the U
-
shaped bracket on the right side frame (C) and secure them with one 13mm bolt (H1).
1.2. Fasten the back bottom stretcher (H) to the bottom U
-
shaped bracket on the right side frame (C) with one 13mm bolt (H1).
E
H
C
H
C
H
H1
The threaded holes for drawer box
supports face the front of the unit.
C
