page 2 of 8
IMPORTANT
-
READ CAREFULLY
-
RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
This product is intended for a maximum person's weight of 130kg per side. Do not exceed this
weight
Incorrect installation could lead to injury, take care following instructions.
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching
Check the pack and make sure you have all the parts listed
Ensure that this product is fully assembled and secured as illustrated before use
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Dismantle for transportation.
Only use recommended accessories.
Tools are included.
WARNINGS
When moving the bed Always lift Carefully into position NEVER DRAG OR PULL YOUR BED
OTHERWISE THIS COULD DAMAGE ESSENTIAL COMPONANATS.
DO make sure the legs remain in contact with the ground.
DO keep small parts out of reach of children.
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn.
DO NOT stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product
DALLAS KING SINGLE BED
ASSEMBLY INSTRUCTION
