CUBO CUB-CU164-FP Shelving Unit
4
For assembly advice or parts go to
STEP THREE: Install Hardware in the SHELVES
•
Take the SHELVES and lay them with the holes facing UPWARDS.
•
Install four
H2 CAMS
in each Shelf as shown below. Ensure that the arrow on the top of each Cam points to
the edge of the Shelf nearest it.
……………….
STEP FOUR: Install Hardware in the BACK PANEL
•
Take the BACK PANEL and lay it with the holes facing UPWARDS.
•
Install four
33 RAFFIX FITTINGS
into the BACK PANEL. Ensure that the Open End of the RAFIX FITTING is
facing the edge of the BACK PANEL. You may need a hammer to tap these into place. Ensure they are
straight.
H33 Rafix Fitting
H2 Cams
