TARGA SYSTEMS
S3 SATA Installation Guide
32003375 Rev 2
4
2.4
Environmental
Conditions
Temperature -40
°
C to +85
°
C
Storage -55
°
C to +95
°
C
Altitude
50,000
ft
Humidity
10-100%
Condensing
Shock, Operating
40g, 11 ms, ½ sine
Vibration
PSD
0.04g
2
/hz,5-2000 Hz
2.5
PC Card (FLASH ATA
)
PCMCIA/ATA Type II
True IDE Mode Compatibility required
ATA Modes
PIO modes 1- 4 and DMA Modes 0-2
UDMA modes are not supported at this time
Capacity
all PC Card ATA capacities are supported
Card Size
0.18"h x 3.37"l x 2.12"w
5mm x 85.6mm x 54mm
Weight
40
g
nominal
Card Retention
The memory card is secured in place via a specially selected
PCMCIA guide socket and the DTU front door.
The PCMCIA/ATA cards provide enhanced data reliability via the following mechanisms:
·
All erase/write operations are performed in a closed loop operation to verify data has
been erased and programmed correctly with the proper voltage margins.
·
Data is checked with a powerful Error Correction Code (ECC) that offers a high degree
of data protection.
·
Built in defect management with automatically sector reassignment based on detected
memory errors.
2.6
Reliability Performance
Environment MTBF
(hrs)
GB 35°C
1,038,240
GM 45°C
207,648
AIC 35°C
311,472
AUC 55°C
83,059
AIF 45°C
186,883
AUF 45°C
83,059
ARW 35°C
103,824
Computed per
Mil-Hdbk 217F parts count
and RAC Reliability toolkit
environmental conversion
factors
2.7
Maintainability/Logistics
Support
In reviewing the Holder and Memory Card unit costs versus the costs in establishing a depot
repair facility, Targa recommends the following:
a.
Holder be specified as an LRU with return to Targa Systems for repair.
b.
PCMCIA/ATA card be specified as an LRU item and be declared as a disposable
item when faulty.
Maintenance Activities
None
Test Equipment
a. Industry Standard PC with SATA Interface
b. SATA Test cable and a 5Vdc power source
BIT
Features
None
Keying
a.
rear connector “D” shell ensures proper connector orientation.
b.
PCMCIA/ATA cards are keyed to ensure proper orientation on insertion.
