Targa Visionary LT 2210
Getting Started
English - 11
Inserting the Batteries
Insert the supplied batteries (size AAA) into the remote control. Be sure to
respect the polarity. The polarity is indicated with the s and – on the
batteries and in the battery compartment on the remote control.
Remove the batteries from the remote control when you are not
going to use the device for a long period of time. Otherwise the
remote control may become damaged by leaking batteries.
Switching the Device On and Off
Powering On
Check that the LT 2210 is in Standby mode. The power indicator (22) on the front
panel should light orange. If this is not the case, first power the device on by
toggling the main power switch (1) on the back panel.
To power the LT 2210 on either press the On/Off button (15) on the device’s
control panel or press the
Power
button (1) on the remote control. When the
device is powered on, the front panel power indicator
(22) will light green.
Powering Off
To power the LT 2210 off either press the On/Off button (15) on the device’s
control panel or press the
Power
button (1) on the remote control. This will turn
