Tarfire SF-2200H-QG, Руководство по эксплуатации

Страница: 19 / 31

SF-2200H Flame / Plasma CNC Cutting System Operating Manual 17
6.2 .1
、
Speed Figure
Including:
1
．
STARTUP
——Start speed, the speed that X and Y axis start and stop(unit mm/minute);
2
．
TIMING
—— Adjust time, the time that system from start speed to Max speed needs.
3
．
HIGH SPD
—— The max limit speed, it is the max speed when manual cutting and execute G00
order.
6.2 .2、 System Parameter:
Under PARA menu, press 【F2】, displayed as below
1. NUMERATOR/DENOMINA- ---- The ratio that electronic gear numerator and denominator is Pulse
Equivalent*1000. Example: System
’s Pulse Equivalent is 0.008mm, the electronic gear
图 6.2 速度参数设置
图 6.3 System parameter setting