TY-51095L Air Impact Wrench
7.Installation
Prior to use
The impact wrench requires the attachment of a quick-connector into its air inlet. To do so, wrap
approximately 3" of pipe thread sealer tape (not included) around the male threads of a quick-connector.
Then, firmly tighten the quick-connector into the air inlet
Assembly instructions
•
Mount a male plug (included) by hand into the air inlet (D). (See Fig7.1)
Note:Use thread sealant tape (not included) on the male plug and tighten it with a wrench (not included)
for airtight connection. Do not over-tighten
•
Place 2 - 3 drops of air tool oil (included) into the male plug before each use. (See Fig 7.2)
•
Choose the correct impact socket (not provided) as needed and mount it onto the anvil (A) (See Fig 7.3)
Note: Only use impact sockets that have an RPM rating equal to or greater than the tool itself.Connect air
supply hose to the male plug. Set the working pressure at 90 PSI for best tool performance.(See Fig 7.4)
Important:
Never cool an impact wrench in water, it can result in brittleness and early failure.
9938501|TY-51095L Passport
/
7 11
Tarboya Pneumatic T
ools Co.,Ltd.
Fig 7.1
Fig 7.2
Fig 7.3
Fig 7.4
