9) Window Activation Setup:
Configure Signal to trigger window / Lock
- With the door open, switch on the ignition.
- Hold the master pressed until beep 8.
- The alarm will respond informing:
1 Beep
= Universal
2 Beeps
= VW G5
4 Beeps
= VW G6
3 Beeps
= FIAT
5 Beeps
= VW UP
6 Beeps
= MOBI
To change, press the Master key the number of times referring to the desired setting.
Each time you press the Master, the alarm confirms with 1 beep. After turning off the
ignition, the alarm will confirm the new setting with beeps.
+
MASTER
+
Configure
1X = Universal
2X = VW G5
3X = FIAT
4X = VW G6
5X = VW UP
6X = MOBI
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
Select the Beep 8 function
9.1 Universal Mode:
negative signal 15 seconds.
9.5 VW UP:
Only for LOCK and UNLOCK.Connect the Red / Black alarm wire to the Brown / Green wire located
on the left pillar of the vehicle.
IT IS NOT NECESSARY TO USE A RESISTOR.
9.6 MOBI:
New Uno after2015, MOBI and ARGO, with original power windows.Connect the Green / Black
wire of the alarm to the Brown / Green wire of the 6-way harness of the original alarm, located at the steering
column.
9.3 FIAT Mode:
Palio, Idea, Punto and Linea with automated power windows, up and down. Connect the
Green / Black alarm wire to pin 8 on the original switch, to the Palio and Idea line located behind the glove
box. On Linea and Punto, Red / Black wire in the switch located behind the fuse box.
9.4 VW G6 and G7 Mode:
Gol, Saveiro, Voyage (generation 6 and 7), with original windows. Connect the Red
/ Black alarm wire to the Brown / Red wire, pin 36, from the original control panel located above the fuse
box.Functions: lock, unlock, close and open the windows.To openthe windows, hold the control off button
pressed with the alarm off.
9.2 VW G5 mode:
Gol, Saveiro, Voyage (generation 5) manufactured after February 2009, with window and
original electric lock. Close the windows, lock and unlock the doors. Connect the Green/Black alarm wire to
pin 5 of the original panel 23-way connector, located above the accelerator pedal. DO NOT connect Red /
Black and Red / Yellow (lock and unlock) wires.
05
