Taramps Tarsafe TMA 10 G4, Руководство пользователя

Страница: 2 / 16

Setting
1
2
3
4
5
Alarm Response Sensor Sensitivity
+20%
+10%
STANDARD
-10%
-20%
1 Beep
2 Beeps
3 Beeps
4 Beeps
5 Beeps
Decrease
Increase
2) INCLINATION sensor
The TMA G4 Alarm has a central accelerometer which records the inclination of the motorcycle every time the
alarm is activated from the remote.When changing the inclination of the motorcycle with the alarm is activated,
it activates the siren and the indicators.The standard sensitivity of the inclination sensor is setting 3, you can
change the sensitivity through programming.
- Turn on the ignition.
2 Beeps = Sensitivity +10%
- Put the OR/BLK wire to GND until beep 12.
- The alarm will sound with the current setting:
Set inclination Sensor Sensitivity
1 Beep = Sensitivity +20%
3 Beeps = Sensitivity Standard
5 Beeps = Sensitivity -20%
4 Beeps = Sensitivity -10%
Select Beep function 12
OR/BLK
to
GND
Settings
1X = +20%
2X = +10%
3X = Standard
4X = -10%
5X = -20%
To change, touch the OR/BLK wire to GND the number of times related to the
desired setting. At each touch, the alarm confirms with 1 beep. After turning off
the ignition, beeps confirm the new setting.
•
T he installation of the product must be carried out by a qualified professional;
•
For its perfect operation , the +12V signal with ignition on, needs to be connected to the alarm;
•
T his product is only intended to prevent or inhibit motorcycle theft;
•
Place the alarm central away from metal parts, modules, cables and ignition coil. Clean the installation area of the
alarm central very well well;
•
The TARAMPS motorcycle alarm has an inclination sensor and for its perfect operation it is necessary that the
central unit is correctly placed.
•
Before contacting TARAMPS technical support, read the manual, which contains all the information necessary for
the i nstallation and use of the product;
•
During installation, use a multimeter to measure signals from the motorcycle;
ATTENTION: We recommend the complete reading of this manual before proceeding with the
installation of this product.
1) Before starting
Attention: To prevent false triggers from the inclination sensor, the alarm
centralmust be well placed and fixed with double-sided tape.
01