Taramps DS 250x2, Инструкция по эксплуатации

Страница: 10 / 14

4 - CROSSOVER: Set the operating mode of amplifier :
1 - INPUT: Inputs of signals to be amplified. Connect these signals to RCA outputs of Head
Unit, using good quality shielded cables to avoid noise interference.
2 - LEVEL: It sets the amplifier input sensitivity, which allows an optimal adjustment to the
output signals levels of nearly all models of Head Units found in the market.
3 - HIGH PASS - (HPF): Variable adjustment from 80Hz to 2.2KHz, which determines the
beginning of the amplifier operating frequency, when select HPF mode.
CROSSOVER
HPF LPF
FULL
CROSSOVER
HPF LPF
FULL
Audio track
8Hz
-3dB
45KHz 80Hz
Audio track
8Hz
-3dB
45KHz 2.2KHz 80Hz
↔
Audio track
8Hz
-3dB
45KHz
HIGH PASS
FREQ.
80Hz 2.2KHz
CROSSOVER
HPF LPF
FULL
SELECTOR POSITION - HPF - (HIGH PASS)
Amplifies the whole audio range, responding from
8Hz to 45KHz. This function is normally used when
there is an external crossover in the system.
SELECTOR POSITION - FULL
SELECTOR POSITION - LPF - (LOW PASS)
Amplifies signals with more intensity from the
selected frequency ranging from 80Hz to 2.2KHz
(-6dB / Octave). This type of function is used for
playback of mid-bass, mid-range speakers, horns or
tweeters.
Amplifies only bass signal, the response is limited to
80Hz (-12dB/8ª), an optimal frequency cutoff for sub-
woofers.
Functions & inputs
LED indicator
09
ENGLISH
HIGH PASS
FREQ.
80Hz 2.2KHz
CH2
CH1
INPUT
LEVEL
MIN. MAX.
CROSSOVER
HPF LPF
FULL
1 2 3 4
ON: Indicates that amplifier is on.