Taramps Bass 400, Инструкция по эксплуатации

Страница: 12 / 14

11
Installation
Recommended wire gauge & fuse
CAUTION: All connections to power supply, input and output connectors must be
carried out only with amplifier off.
Check polarity and never reverse power supply cables due to the risk of damage to the
amplifier.
Positive / negative power supply cable ___________________ ____________ 11 AWG
Output cables with gauge_______________________________ __________ 13 AWG
Remote cable ___________________ ________________________________ 18 AWG
It is compulsory to install a protection fuses or circuit breakers as close as possible from
batteries.
Calculated considering a maximum length of 4m. Distance greater than this, you will
need to increase the cable gauges.
Protection fuse or circuit breaker _______________________________________ 40A
Caution: Using wire gauges below the recommendation will result in power loss and
overheating of wiring.
Illustrative images
Remote Cable 18 AWG
4mm² (11 A
WG)
RCA Cable Taramps
Head Unit
12V
GND
Wire Input:
If you choose to use this input, you won’t need to connect
the RCA’S cable and remote signal.
2 ohms
Connection example in the output: Subwoofer
4mm² (11 A
WG)