LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Tara Laser II is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is up to and including 90 days from the receipt of shipment. Parts, product
repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Tara Laser II authorized reseller, and does not apply to fuses, disposable batteries, or to
any product which, in Tara Manufacturing’s opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Tara Manufacturing warrants that
software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Tara Manufacturing does not warrant that software will
be error free or operate without interruption. Tara Manufacturing’s warranty obligation is limited, at Tara Manufacturing’s option, to refund of the purchase price, free of charge repair, or replacement of a defective
product which is returned to a Tara Manufacturing within the warranty period. To obtain warranty service, contact Tara Manufacturing (2294 Old 431 Hwy., Owens Cross Roads, AL, 256-725-2500) to obtain return
authorization information. Then send the product as instructed, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Tara Manufacturing assumes no risk for damage in transit.
Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Tara Manufacturing determines that failure was caused by neglect, misuse, contamination, alteration,
accident, or abnormal condition of operation or handling, including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Tara Manufacturing
will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the
repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TARA MANUFACTURING SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or
consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent
jurisdiction, such holding will not affect the validity or enforceability of any other provision.
Tara Liners & Safety Covers • 256-725-2500 • www.taralaser.net
TROUBLESHOOTING
Laser stops in the middle of a measurement:
Sometimes the laser will pause for a second to calibrate. Allow it
5 - 10 seconds to complete the calibration process.
Laser stops and won’t continue for longer than 10 seconds:
A strong glare from the pool walls, can
interfere with the laser and cause it to freeze. Try shading the wall of the pool where the laser is measuring. If this doesn’t work
wait to measure the pool when conditions are not as bright.
Laser device can not connect to App:
The laser connects via Bluetooth signal to an iPad or iPhone. If the distance
between the laser and the iPad or iPhone is too great it will loose signal. Try moving the iPad or iPhone closer to the laser.
Sharp spikes on the diagram display:
The surface is too bright or reflective and is interfering with the laser.
For all other issues call Technical Support, 256-725-2500. Never attempt to open the case
of the laser!
LASER CLASSIFICATION
The Tara Laser II generates a visible laser beam that is emitted from the front of the device. The device complies with laser class 2
according to:
_ IEC60825-1: 2007 Safety of laser products
_ EN60825-1: 2007 Safety of laser products
Laser class 2 products
Do not look into the laser beam and do not unnecessarily aim at other persons. The eye is usually protected by preventive
reactions such as the eyelid closure reflex.
WORKING SPECIFICATIONS
Range 6 inches to 100 feet
Measuring accuracy Typ.: ± 0.12 in*
Laser class 2
Laser type 635 nm, < 1 mW
Battery run time: up to 4 complete pool measurements
Temperature range:
- Storage (-13°F to +130°F)
- Operation (32°F to +90°F)
* Under favorable conditions (good target surface, room temperature) up to 10 m (33ft). Under unfavorable conditions such
as bright sunlight, a weakly reflecting target surface or large temperature fluctuations, the deviation can rise causing errors or
shutdown of the unit.
* Specifications subject to change without notice.
laser ii
TARA
